B-CARE® Service and Support Program

The B-CARE® program from Berghof Membranes is an end-to-end comprehensive program developed to support our OEM partners from the piloting and engineering phase to operational system monitoring.

Because process streams and wastewater can vary significantly, there is no typical or standard wastewater treatment solution.

Unique, customized solutions are the specialty of Berghof Membranes.

Brochure Overview


The B-SCAN™ system from Berghof Membranes is a benchtop UF system to help you develop new applications and optimize existing applications.

  • Quick screening of wastewater/feed samples
  • New application analysis
  • Short-term analysis
  • Pre-pilot analysis
Pilot System Specifications
Capacity 4,0 – 10,0 L/h*
Crossflow velocity 0,6 – 4,0 m/s
Transmembrane pressure – 0,2…+ 6,0 bar
Max temperature 60 °C
pH Range 2 – 13
Power requirements Single phase (110 – 240V AC / 50 60 Hz)
Control VFD pump and membrane valves
Data output Wi-Fi, SD Card
Dimensions (LxWxH) 1070 x 520 x 642 mm
Weight 75 kg
Module Type MO P1U (o.5m)i8
Total Membrane Area 0.024 m2
Required feed amount 25 – 100 L

*Depending on the application

Interested in an
application analysis service? 


New applications often require on-site testing or support from our applications center to ensure optimal treatment of effluent. During the pilot phase, the system is validated to ensure that it will meet the required permeate quality, energy consumption, chemical resistance, and plant capacity.

By putting our pilot unit to work, we can show you the advantages of our external membrane technology for your specific application. Contact us for more details.

Do you want to find out if our solutions
are right for your company?
Contact us to request a pilot unit.

Pilot System Specs
Capacity 4,0 – 15,0 m³/d*
Crossflow velocity 1,0 – 4,0 m/s
Transmembrane pressure – 0,2…+ 6,0 bar
Max temperature 40 °C
pH Range 2 – 12
 Control Berghof screen and PLC
System dimensions (L x W x H) 6,10 x 2,45 x 2,6 m
Weight 1800 kg
Module type MO 315G_I8 LE
Number of modules 1 – 4
Total membrane area 8,4 m²

* Depends on application

Interested in a
pilot unit?


More than 50 years of experience and over 1,500 references are the foundation of our experience in the design and commissioning of external membrane filtration systems.
We know that any membrane system can only meet the expected performance when each element is thoroughly calculated, designed, engineered and assembled.

During the commissioning phase, our network of experienced engineers are available to provide the necessary on-site support to get your system up and running as quickly as possible. They will not only oversee installation, but they will develop detailed system documentation and operation guidelines to ensure optimal performance and minimal maintenance long after the start-up.

Need engineering support? Contact us 

Technical and After Sales Support

Even after a system has been installed and optimized, Berghof Membranes engineers don’t stop there. We offer a suite of after-sales service programs that include :

  • Replacement modules
  • Service agreements
  • Extended warranties
  • On- and off- site support
  • Operator training
  • B-CONNECT™ platform to enable remote monitoring and access
  • Installed base management
  • Membrane autopsy
  • System trouble-shooting

Need support?
Contact us